RM新时代官方-首页

1. Let the mixing tank run at full speed for one or two minutes before unloading. Allow the concrete to be fully mixed. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.

2、放料前先把出料斗溜槽打濕。 放料時把車盡量停在平地上放料前先把出料斗溜槽打濕，方便清洗。

2. Wet the chute of the discharge hopper before discharging. When discharging, park the car on the flat ground as far as possible. Wet the chute of the discharge hopper before discharging to facilitate cleaning.

3、卸料不要大意和放料工打好關系。 放料時應自己看著，免得放料工亂操作放料操作桿，每次罐子正反轉中間位子時應停一下，保護減速機，托輪等。 與放料工打好關系，卸料時也不要睡的太熟，萬一工人鬧情緒，把你車子放到工地不轉罐子，造成悶罐就麻煩了。

3. Don't be careless in discharging and have a good relationship with the discharging worker. When discharging, you should watch by yourself to avoid the discharging worker's random operation of the discharging operating rod. Stop every time the tank is in the middle position of forward and reverse rotation to protect the reducer, supporting wheel, etc. Have a good relationship with the discharging workers. Don't sleep too well during unloading. In case the workers are in a mood, put your car on the construction site and don't turn the cans, which will cause trouble for stuffy cans.

4、攪拌罐一定要仔細地沖洗干凈。 洗罐子時一定要仔細的沖洗干凈，并把水反復的正反轉兩次，再放出來，之后一趟時把水箱的水全部放進罐子，再回到站加水徹底清洗罐子。

4. The mixing tank must be washed carefully. When washing the jar, be sure to wash it carefully, and repeat the positive and negative rotation of the water twice, and then release it. After that, put all the water in the water tank into the jar, and then return to the station to add water to thoroughly clean the jar.

5、別忘了施工單位簽字。 把到工地時間和自己的大名簽上，別忘了施工單位簽字，否則白干了。

5. Don't forget to sign by the construction unit. Sign the time when you arrive at the construction site and your name. Don't forget the signature of the construction unit, otherwise you will do it in vain.