RM新时代官方-首页

我們在進行攪拌車的安裝的時候，它的調試部分非常重要，千萬不能忽視。如果之前不知道怎么做，不如跟著小編深入了解一下，這樣以后就不用擔心無法正確安裝調試了。

When we install the mixer truck, its debugging part is very important and must not be ignored. If you don't know how to do it before, it's better to follow the editor in depth, so that you don't have to worry about not being able to install and debug correctly in the future.

1、根據工藝前提、攪拌目的和要求選擇攪拌器的類型。在選擇攪拌器類型時，應充分掌握攪拌器的動態特性以及攪拌器在攪拌過程中的運動形式與各種攪拌目標之間的因果關系。

1. The type of agitator shall be selected according to the process premise, mixing purpose and requirements. When selecting the type of agitator, we should fully grasp the dynamic characteristics of the agitator and the causal relationship between the movement form of the agitator in the mixing process and various mixing targets.

2、根據確定的攪拌器型號和攪拌器在攪拌過程中的運動狀態，工藝對混合時間、沉降速度和分散度的控制要求，通過實施方法和計算機模擬設計，確定電機功率、攪拌速度、攪拌器直徑。

2. According to the determined agitator model, the movement state of the agitator in the mixing process, and the control requirements of the process on the mixing time, settling speed and dispersion, the motor power, mixing speed and agitator diameter are determined through the implementation method and computer simulation design.

3、根據電機功率、攪拌速度和工藝條件，從減速機選型表中選擇減速機型號。假設根據實際工作扭矩選擇減速機，實際工作扭矩應小于減速機的允許扭矩。

3. Select the reducer model from the reducer selection table according to the motor power, mixing speed and process conditions. Assuming that the reducer is selected according to the actual working torque, the actual working torque should be less than the allowable torque of the reducer.

4、根據減速機的輸出軸頭d和攪拌軸系統的支承方式，選用與d相同型號規格的機架和聯軸器。

4. According to the support mode of the output shaft head D of the reducer and the mixing shaft system, the frame and coupling with the same model and specification as D are selected.

5、根據機架的攪拌軸頭尺寸、安裝空間、工作壓力和工作溫度選擇軸封的類型。

5. The type of shaft seal is selected according to the size of the mixing shaft head of the frame, installation space, working pressure and working temperature.

6、根據安裝方式和結構要求，設計選擇攪拌軸的結構型式，并檢查其強度和剛度。

6. According to the installation method and structural requirements, the structural type of the mixing shaft is designed and selected, and its strength and stiffness are checked.

7、根據機架的DN、軸架類型和攪拌軸的壓力等級選擇底蓋、法蘭座或法蘭。

7. The bottom cover, flange seat or flange shall be selected according to the DN of the frame, the type of shaft frame and the pressure grade of the mixing shaft.

8、根據支架和抗振條件，確定是否可以配備輔助支架。

8. Determine whether the auxiliary support can be equipped according to the support and anti vibration conditions.

在上述選型過程中，可以參考自動上料攪拌車的攪拌和安裝的組合和設備。設備過程中部件之間的連接輪轂尺寸為軸頭尺寸，軸頭尺寸相同的部件可按規則互換組合。

In the above selection process, you can refer to the combination and equipment of mixing and installation of automatic feeding mixer. The size of the connecting hub between components in the process of equipment is the size of the shaft head, and components with the same size of the shaft head can be interchanged and combined according to rules.

以上就是對攪拌機安裝調試的梳理，希望大家看完這篇文章的介紹后，可以更加了解自己需要做什么。更多相關內容就來網站http://jackpetty.net關注咨詢吧！

The above is the sorting of mixer installation and debugging. I hope you can know more about what you need to do after reading this article. Come to the website for more relevant content http://jackpetty.net Pay attention to consultation!