RM新时代官方-首页

自動上料攪拌車廣泛用于基礎、灌樁、樓板、路面、場坪、護坡、溝渠、河道、橋梁、涵洞、隧道、中小型水庫等中小型工程。為了更好的使用設備，用戶們在購買設備時須要對企業的產品性能、質量及服務作深入了解。接下來主要講一下關于自動上料攪拌車的調試條件。

The automatic feeding mixer is widely used in small and medium-sized projects such as foundation, grouting pile, floor slab, pavement, yard, slope protection, ditches, rivers, bridges, culverts, tunnels, and small and medium-sized reservoirs. In order to better use the equipment, users need to have a deep understanding of the product performance, quality and service of the enterprise when purchasing the equipment. Next, we will mainly talk about the commissioning conditions of the automatic feeding mixer.

1、需調試設備各部件、附件及隨機東西應按標準裝備齊全。

1. All parts, accessories and accompanying items of the equipment to be commissioned shall be complete as per the standard.

2、備好液壓油和潤滑油脂，液壓油的油質應符合要求。

2. Prepare hydraulic oil and lubricating grease, and the oil quality of hydraulic oil shall meet the requirements.

3、按規定加注液壓油、燃油、潤滑油和冷卻水，且液壓油加規定油面。

3. Fill the hydraulic oil, fuel, lubricating oil and cooling water as required, and add the hydraulic oil to the specified oil level.

4、應對混凝土泵進行檢查、調試和試運轉，使之進入正常作業狀況，液壓體系調試后應符合標準。

4. The concrete pump shall be inspected, debugged and commissioned to make it work normally. The hydraulic system shall meet the standards after commissioning.

5、調試用自動上料攪拌車管管路管徑為125。

5. The pipe diameter of automatic feeding mixer for commissioning is 125.

6、實驗混凝土應符合標準。

6. The experimental concrete shall conform to the standard.

7、設備應安放在平整堅實的地面上。

7. The equipment shall be placed on a flat and solid ground.

注意：

be careful:

打火前先查驗機油、防凍液、潤滑油和冷卻水等，發覺不夠時，應再次進行加上。

Before ignition, check the engine oil, antifreeze, lubricating oil and cooling water, and add them again if insufficient.

自動上料攪拌車開啟后，再讓罐子低速旋轉，圍繞著車查驗輪胎氣壓，是不是有漏氣的胎，再用螺絲刀剔掉在胎縫中的碎石子，查驗。

After the automatic feeding mixer is started, let the tank rotate at a low speed, check the tire pressure around the vehicle to see if there is a leaking tire, and then use a screwdriver to remove the gravel in the tire seam for inspection.

查驗燈光，尤其是腰燈，盡量保障照著車胎邊緣，施工工地會經常亂堆放鋼筋之類的物品，而胎側是較薄弱的。

Check the light, especially the waist light, to ensure that it can shine on the edge of the tire as much as possible. The construction site will often pile up reinforcement and other items, and the tire side is weak.

用毛巾擦干凈兩邊的后視鏡，窗戶玻璃，施工工地路況復雜，光線不太好，視野要保障。

Wipe the rear-view mirrors and window glass on both sides with a towel. The road conditions on the construction site are complex and the light is not good. The vision should be guaranteed first.

用戶們除了對在購買產品時需嚴格檢驗以外，其實在日常保養問題上也是不可缺少的必要工作，這樣才能達到在操作過程中使用輕松且使用壽命更長的理想效果。關注我們http://jackpetty.net，了解更多相關的注意事項！

In addition to strict inspection when purchasing products, users are also indispensable and necessary for daily maintenance, so as to achieve the ideal effect of easy use and longer service life in the process of operation. Follow us http://jackpetty.net , learn more about precautions!