RM新时代官方-首页

　　Automatic filling mixer is a special heavy truck, which has high load, complex road conditions and large inertia centrifugal force produced in the mixing process of storage tank, which brings heavy burden to the braking system of mixing system. Although the braking system is very important to the mixer system, the braking distance and thermal degradation of the brake should be considered first when determining the safety of the automatic filling mixer.

　　如果自動灌裝攪拌車的制動系統出現問題，駕駛員和乘客也有危險。因此，在駕駛或踩踏制動器時，請務必小心制動器。

　　If there is a problem with the brake system of the automatic filling mixer, the driver and passengers are also at risk. Therefore, be careful when driving or applying the brake.

　　1.制動時發出異常聲音

　　1. Abnormal sound when braking

　　踩剎車時，剎車系統會產生強烈的金屬摩擦。這可能是由于剎車片上的異物或剎車盤上的銹蝕所致。

　　When stepping on the brake, the brake system will produce strong metal friction. This may be due to foreign matter on the brake pads or rust on the brake discs.

　　2，剎車踏板行程會更長

　　2. The brake pedal travel will be longer

　　制動器柔軟時，可以看到白色斑點。較長的制動行程的原因主要是由于空氣侵入制動系統，缺少制動油，可能的泄漏以及制動襯塊的嚴重磨損。

　　When the brake is soft, white spots can be seen. The long brake stroke is mainly due to air intrusion into the brake system, lack of brake oil, possible leakage and severe wear of brake pads.
              

　　3，剎車偏

　　3. Brake deviation

　　制動器偏離現象不是很普遍，主要反映了在施加制動器時手柄偏向一側的事實。造成這種現象的原因是制動襯塊偏心磨損和制動缸問題。

　　The brake deviation is not very common, which mainly reflects the fact that the handle is biased to one side when the brake is applied. The cause of this phenomenon is the eccentric wear of brake pad and the problem of brake cylinder.

　　4，剎車變得越來越困難

　　4. Braking becomes more and more difficult

　　許多自動灌裝攪拌車具有增強的制動問題。加強制動器的主要原因是真空助力器損壞。制動器不輔助，經常使用。

　　Many automatic filling mixers have enhanced braking problems. The main reason for strengthening the brake is that the vacuum booster is damaged. The brake is not auxiliary and is often used.

　　5，剎車回彈

　　5. Brake rebound

　　有許多自動灌裝攪拌車伙伴遇到這種情況，但是在應用制動時，主要是由于制動盤表面的不規則性，上肢彈回了制動踏板。墊子和鋼圈變形。

　　Many auto filling mixer truck partners encounter this situation, but when applying the brake, the main reason is that the surface of the brake disc is irregular, and the upper limb bounces back to the brake pedal. The cushion and steel ring are deformed.