RM新时代官方-首页

When we use the automatic loading mixer in our actual operation, sometimes it will lead to blockage due to some reasons. To a certain extent, it can directly affect the structural efficiency of the mixer, and then let the editor teach you some ways to prevent blocking it.

1.卸載時刻參數是不合理的

1. The parameter of unloading time is unreasonable

因?yàn)?a href="http://jackpetty.net">自動上料攪拌車無法在料倉中安裝料位機，因此該職業基本上具有時刻控制。如何設置時刻參數，加載和卸載時刻設置實際上十分簡單。使用時，首要設置一個小時刻，然后根據每個吸入方位漸漸添加，當物料水平達到吸進口時刻，然后減去一秒是合理的時刻。放電時刻是為了保證資料再次放電。這有兩個長處：首要，資料水平太高，并且對過濾元件的損壞特別大。因?yàn)檫@個原因，咱們的一些客戶能夠使用一個過濾器兩年半。第二，每次清潔物料時，切斷閥在關閉時不會關閉閥門，并且閥門頻頻操作的密封閥未切換五次或六次是特別有害。

Because the automatic feeding mixer can not be installed in the bin level machine, so the occupation basically has time control. How to set time parameters, loading and unloading time setting is actually very simple. When using, first set a small time, and then add gradually according to each suction direction. When the material level reaches the suction inlet time, then subtract one second is a reasonable time. The discharge time is to ensure the data discharge again. This has two advantages: first of all, the data level is too high, and the damage to the filter elements is particularly large. For this reason, some of our customers can use a filter for two and a half years. Second, when cleaning materials, the shut-off valve will not close when it is closed, and it is particularly harmful that the frequently operated sealing valve is not switched five or six times.
                

2.自動上料攪拌車進料口的進料量是否合理？

2. Is the feeding rate of the automatic feeding mixer reasonable?

咱們的許多項目都使用手動槍來吸取資料。為了便于將資料槍直接插入資料筒或噸袋中，資料槍的吸進口被緊密的資料壓縮，強大的負壓將完整的資料拉走。裝載機十分具有損壞性，能夠輕松堵塞管道。正確的方法是資料在吸進口和空氣中構成必定的氣液混合比，并在氣流的推動下均勻地流入進料器。假如資料積壓時刻太長，可能會十分困難。此時，槍上需求一個振蕩器來?yè)p壞凝聚的資料。

Many of our projects use manual guns to get information. In order to insert the data gun directly into the data cylinder or the ton bag, the suction inlet of the data gun is compressed tightly and the complete data is pulled away by the strong negative pressure. Loaders are very destructive and can easily plug pipes. The correct method is to form a certain gas-liquid mixing ratio in the suction inlet and air, and flow into the feeder evenly under the push of air flow. If the backlog is too long, it may be very difficult. At this point, the gun needs an oscillator to damage the condensed data.

在自動上料攪拌車的實際操作中，不可防止地會發生某些故障。堵塞材料更嚴重。因此，我希望在了解上述自動上料攪拌車的回避方法后，能夠正確合理地操作設備。

In the actual operation of the automatic feeding mixer, some faults can not be prevented. The blocking material is more serious. Therefore, I hope that after understanding the above avoidance methods of automatic feeding mixer, I can operate the equipment correctly and reasonably.