概述:為何混凝土攪拌車的罐行駛中總是轉,盡管常常見到,但很多人的想法都不太一樣,也是有很多人感覺原理非常簡單?;炷翑嚢柢?chē)料機剛出去的混
為何混凝土攪拌車的罐行駛中總是轉,盡管常常見到,但很多人的想法都不太一樣,也是有很多人感覺原理非常簡單。混凝土攪拌車料機剛出去的混凝土是初料,只不過在配料后完成比較簡單的拌和,為了更好地確?;炷恋木|(zhì)性,須要在混凝土攪拌車?yán)锿瓿啥伟韬汀?
Why does the tank of concrete mixer always turn when driving? Although we often see it, many people have different ideas, and many people feel that the principle is very simple. Concrete mixer just out of the concrete mixer is the initial material, but after mixing, it is relatively simple to complete the mixing. In order to better ensure the homogeneity of concrete, it is necessary to complete the secondary mixing in the concrete mixer.
通常攪拌車須要確保每分十-三十轉的速度,夏天很有可能更低,只須要確?;炷敛划a(chǎn)生離析和初凝就可以,過于頻繁的拌和反倒會導致混凝土中的水份過于揮發導致出料和易性差,影響到混凝土構件澆筑產品質量,反映在蜂窩表面漏筋等產品質量瑕疵上。
Generally, the mixer needs to ensure the speed of 10-30 revolutions per minute, which is likely to be lower in summer. It only needs to ensure that the concrete does not produce segregation and initial setting. On the contrary, too frequent mixing will lead to too much evaporation of water in the concrete, resulting in poor discharge and workability, which will affect the quality of concrete pouring products, which is reflected in the quality defects of honeycomb surface reinforcement leakage and other products.
混凝土攪拌車物流運輸中途的二次拌和應屬深加工,可是并不是比較簡單的轉動,罐體轉動次數對混凝土的均質性尤其關重要,6~8轉/分鐘為宜;過慢,混凝土內部粗骨料容易下沉,太快,對駕駛員的有一定的影響到,而且也會增加混凝土水份的流逝,坍落度加大,影響到卸料;6~8轉/分鐘時,混凝土的初凝時間通常在3~6個小時。短暫的堵車對混凝土的影響到微乎其微,如果堵車時間過長,混凝土的罐體轉動次數要適當加快1~2圈,并要時刻注意罐體轉動是否異常,適當?shù)臅r(shí)候可以加水來保持混凝土的和易性,避免粘罐和悶罐。
The secondary mixing of concrete mixer truck in the middle of logistics transportation should be deep processing, but it is not a simple rotation. The rotation times of the tank body are particularly important for the homogeneity of concrete, 6 ~ 8 rpm is appropriate; if it is too slow, the coarse aggregate inside the concrete is easy to sink, too fast, which has a certain impact on the safety of the driver, and it will also increase the water loss and slump of the concrete The initial setting time of concrete is usually 3-6 hours at 6-8 rpm. The short-term traffic jam has little effect on the concrete. If the traffic jam is too long, the rotation times of the concrete tank should be appropriately accelerated by 1 ~ 2 circles, and attention should be paid to whether the rotation of the tank is abnormal at all times. When appropriate, water can be added to maintain the workability of the concrete to avoid sticking and stuffy tank.
在混凝土攪拌車物流運輸中途充分拌和還可以縮短混凝土初凝時間、提高混凝土的物理性能。
It can also shorten the initial setting time of concrete and improve the physical properties of concrete.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: mixer truck http://jackpetty.net .