概述：在自動上料攪拌車設備的運行和使用過程中，由于長期不間斷運行，其溫度自然會升高，但是如果溫度超過設備本身可以承受的溫度，則設備會受到
在自動上料攪拌車設備的運行和使用過程中，由于長期不間斷運行，其溫度自然會升高，但是如果溫度超過設備本身可以承受的溫度，則設備會受到一定程度的損壞。因此，當設備溫度過高時，我們需要對其進行相應的維護工作。讓我們一起看一下。
During the operation and use of the automatic feeding mixer, the temperature will naturally rise due to long-term uninterrupted operation, but if the temperature exceeds the temperature that the equipment itself can withstand, the equipment will be damaged to a certain extent. Therefore, when the equipment temperature is too high, we need to carry out corresponding maintenance. Let's have a look.
1.防止發動機過熱：由于環境溫度較高，因此發動機容易過熱。必須加強對發動機冷卻系統的檢查和維護，包括對水箱，恒溫器，水泵，風扇等部件的檢查，并注意及時添加。裝滿冷卻水。當水溫超過100°C時，請停在涼爽的地方冷卻下來，讓發動機以怠速運轉，然后打開引擎蓋以幫助散熱。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. The inspection and maintenance of the engine cooling system must be strengthened, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to adding them in time. Fill with cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, let the engine run at idle speed, and then open the hood to help dissipate heat.
2.防止發動機爆燃：夏季溫度較高，有時會超過35℃。在這個季節，某些零件老化的汽車自然爆燃的可能性更高。所以要做好準備。
2. Prevent engine deflagration: the temperature is high in summer, sometimes exceeding 35 ℃. In this season, cars with aging parts are more likely to deflagration naturally. So be prepared.
3.防止損壞汽車漆：強烈的陽光照射下，汽車漆會變舊并起皺。盡管普通的美容蠟可以起到一定的防曬作用，但是任何汽車蠟都含有硅，這種硅將持續很長時間。紫外線會腐蝕涂料，留下黑點。車蠟本身不具有增強硬度和抗紫外線的作用。相反，它會由于高溫而迅速丟失。停車時，請注意將車盡可能停在涼爽的地方。
3. Prevent damage to the car paint: under strong sunlight, the car paint will become old and wrinkle. Although ordinary beauty wax can play a certain role in sunscreen, any car wax contains silicon, which will last for a long time. Ultraviolet light will corrode the paint and leave black spots. Car wax itself does not have the effect of enhancing hardness and anti ultraviolet. On the contrary, it will be lost quickly due to high temperature. When parking, please pay attention to parking in a cool place as far as possible.
4.防止輪胎爆裂：溫度高，因此更容易爆裂。當溫度太高時，容易使輪胎變形并降低拉伸強度。于輪胎本身，非標準氣壓，輪胎老化，性能減弱或在行駛過程中輪胎在硬質金屬或其他硬物上滾動等都會導致汽車突然爆裂。
4. Prevent tire burst: the temperature is high, so it is easier to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile strength. As for the tire itself, non-standard air pressure, tire aging, reduced performance or tire rolling on hard metal or other hard objects during driving will cause the car to burst suddenly.
5.防止發動機潤滑不良：溫度較高時，機油粘度會降低，抗氧化性會下降，從而導致潤滑不良。因此，應經常檢查機油數量和質量，并及時添加或更換。有必要及時清洗機油濾清器和散熱器，以確保機油沒有溢出。鎖定時，散熱良好，并盡量避免使發動機過載。
5. Prevent poor engine lubrication: when the temperature is high, the oil viscosity will decrease and the oxidation resistance will decrease, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. It is necessary to clean the oil filter and radiator in time to ensure that the oil does not overflow. When locked, the heat dissipation is good, and try to avoid overloading the engine.
6.防止制動故障：在高溫環境下，制動液更容易蒸發和汽化，在制動管路中形成空氣阻力，并且制動蹄也容易燒蝕，從而導致制動故障。 因此，應經常檢查和調整制動系統，并注意在長的斜坡上停車和干燥制動器，以確保良好的制動性能。 如果發現制動輪轂很熱，則應停止冷卻，但不要倒入冷水以防止制動輪轂破裂
6. Prevent braking failure: in high temperature environment, the brake fluid is easier to evaporate and vaporize, forming air resistance in the brake pipeline, and the brake shoes are easy to be ablated, resulting in braking failure. Therefore, the braking system should be checked and adjusted frequently, and attention should be paid to parking and drying the brakes on long slopes to ensure good braking performance. If the brake hub is found to be very hot, stop cooling, but do not pour cold water to prevent the brake hub from cracking
The automatic feeding mixer provides you with the above wonderful contents. For more wonderful contents, please click to enter our website: http://jackpetty.net We will have more content for you to check later.
點擊撥打服務熱線：4008791999
