RM新时代官方-首页

如果發現攪拌體上有傷痕，檢查傷痕的程度。如果只是表面油漆上很輕微的劃痕，立即用混合物處理，擦拭方法是直擦。疤痕消失后，在打蠟前用更細的混合物擦拭。

If there are scars on the mixing body, first check the extent of the scars. If it is only a slight scratch on the surface paint, immediately treat it with a mixture and wipe it directly. After the scar disappears, wipe it with a finer mixture before waxing.

所有的攪拌一體車在使用過程中都有劃痕，一個好的修復方法是用與車身相同的涂層劑填充劃痕。涂層劑可涂一次、兩次或三次。次數越多，就會越干凈。但是整個攪拌體的均勻處理也很重要。

All mixer trucks have scratches during use. A good repair method is to fill the scratches with the same coating agent as the body. The coating agent can be applied once, twice or three times. The more times, the cleaner it will be. However, the uniform treatment of the whole stirring body is also very important.

對于較深的傷痕，關鍵是觀察金屬表面是否外露。如果看不到金屬表面，則不會生銹，可以集中精力涂飾面漆。用筆尖輕拍它，等待油漆完全干燥。

For deeper scars, the key is to observe whether the metal surface is exposed. If you can't see the metal surface, it won't rust and you can concentrate on finishing the finish. Tap it with the tip of your pen and wait for the paint to dry completely.

用彩色膩子可以很好地修復深而細的疤痕。在疤痕上使用砂紙，不要隨意擴大疤痕表面，去除污垢很重要。小心地涂抹膩子，使其完全進入內部。然后涂抹混合物，打蠟并完成工作。

Deep and thin scars can be well repaired with colored putty. Use sandpaper on the scar. Do not enlarge the scar surface at will. It is very important to remove dirt. Carefully apply putty so that it enters completely into the interior. Then apply the mixture, wax and finish the work.

發現車身銹跡后，立即著手。如果不理會，銹斑會逐漸擴大。防止生銹的方法是用砂紙清潔它，或者使用改變生銹點的化合物。

When the rust is found on the car body, it shall be solved immediately. If ignored, the rust will gradually expand. The way to prevent rust is to clean it with sandpaper or use compounds that change the rust point.

貼在門和行李箱周圍的防水條很容易剝落和扭曲。但如果沒有破裂或變形，則可以再次使用，只需重新粘貼即可，以防止漏水。用保護劑恢復橡膠本身的彈性也很重要。

The waterproof strip attached around the door and trunk is easy to peel off and twist. However, if there is no crack or deformation, it can be used again. Just paste it again to prevent water leakage. It is also important to restore the elasticity of rubber itself with protective agent.

攪拌一體車的機油過多或過少都會影響發動機。理想量接近油垢上限。對于補充油，盡量準備與所用油品級相同的產品。注意不要濺到發動機周圍，每月檢查一次。

Too much or too little oil in the integrated mixer will affect the engine. The ideal amount is close to the upper limit of oil scale. For make-up oil, try to prepare products with the same grade as the oil used. Be careful not to splash around the engine. Check it once a month.

保險公司處理傷疤的方法是把毛刺刮掉，在坑洼處涂上膩子，使之光滑。專用膩子，備有各種顏色，選擇相近的顏色。對于與車身同色的保險杠，噴漆非常重要。

The way insurance companies deal with scars is to scrape off the burrs and apply putty to the pits to make them smooth. Special putty, available in various colors, choose similar colors. For bumpers in the same color as the body, painting is very important.

以上就是攪拌一體車常用的應對擦痕、掉漆、小碰撞的維修與保養辦法，希望對廣大朋友能有一些幫助。更多相關的內容您可以來網站jackpetty.net咨詢。

The above are the common repair and maintenance methods for the integrated mixer to deal with scratches, paint falling off and small collision. I hope it can be of some help to the majority of friends. For more information, please visit jackpetty.net Com consulting.