概述:清潔度檢查:座椅、臥鋪。自動上料攪拌車新車的座椅,臥鋪和其它的內飾件都應該是有塑料套的,檢查車輛的塑料套是否完整,坐在座椅上感覺座
清潔度檢查:座椅、臥鋪。
自動上料攪拌車新車的座椅,臥鋪和其它的內飾件都應該是有塑料套的,檢查車輛的塑料套是否完整,坐在座椅上感覺座椅內部是否一異物,如果可以多方調節的座椅,應該進行測試,調試過程中有無異響是否平順,頭枕也不能放過。
Cleanliness inspection: seat and sleeper. The seats, berths and other interior trim parts of the new automatic feeding mixer should have plastic covers. Check whether the plastic covers of the vehicle are complete. If you sit on the seats, you can feel whether there is a foreign object inside the seats. If you can adjust the seats in multiple ways, you should test whether there is abnormal noise during the debugging process, and whether it is smooth.
而臥鋪則需要躺一下,感覺內部有無異物,上下鋪都一樣。在檢查上臥鋪折疊是否平順,檢查是否松動。儀表臺檢查自動上料攪拌車儀表臺是否整潔,有無劃痕;在不插鑰匙的情況下,檢查各種按鈕,看看按鈕是不是都可靠,有沒有按一下就掉下來的“脆弱”情況。
The sleeper needs to lie down for a while and feel whether there are foreign matters inside. The upper and lower bunks are the same. Check whether the upper sleeper folds smoothly and whether it is loose. Check whether the instrument panel of the automatic feeding mixer is clean and free of scratches; Without inserting the key, check all buttons to see whether they are reliable and whether there is a "fragile" situation where they fall off once they are pressed.
再將點火開關放在打開狀態,檢查組合儀表的各項指示燈是否正常工作。在看看別的電子操作按鈕能不能正常工作,例如:手動或電動玻璃升降器,空調調整鈕,點煙器等等,一個都別落下。
Put the ignition switch on again and check whether all indicators of the combination instrument work normally. Check whether other electronic operation buttons can work normally, such as manual or electric window regulators, air conditioning adjustment buttons, cigarette lighters, etc. Don't drop any of them.
雜物箱現在自動上料攪拌車的雜物箱很多,隨便那個地方都用,而且還很“隱蔽”,所以要避免遺漏,檢查封閉式的雜物箱開啟、關閉是否順暢,也可以檢查里面是否有一些“不可告人的秘密”帶帶是保證駕駛?cè)藛T生命的重要部分,所以一定要嚴格檢查,拉開、自動回收、鎖止的可靠性,應該平穩順暢。
Glove box There are a lot of glove boxes in the automatic feeding mixer now. They are used anywhere, and they are also "hidden". Therefore, to avoid omission, check whether the closed glove box can be opened and closed smoothly, and also check whether there are some "hidden secrets" in it. Seat belts are an important part of ensuring the safety of drivers. Therefore, we must strictly check the reliability of opening, automatic recycling, and locking, It should be smooth and smooth.
模擬并檢查帶在發生作用時的可靠性。燈光甭管什么近光燈、遠光燈、轉向燈、剎車燈……只要車上能亮的都仔細檢查一遍,燈光應該明亮、穩定。別是大燈只亮一邊的“獨眼”,或是轉向燈不閃。
Simulate and check the reliability of the safety belt when it works. The light should be bright and stable, regardless of the low beam, high beam, turn signal and brake light. Don't be a "one eyed" headlight with only one side lit, or a turn signal that doesn't flash.
雨刮系統檢查自動上料攪拌車雨刮器噴水系統、刮水系統是否正常,別一盆水泊上來雨刮器刮的還沒蒸發的快呢。雨刮器在刮水應沒有“吱嘎……吱嘎……”的聲音,如果有說明雨刮片已經老化。
The wiper system shall check whether the sprinkler system and wiper system of the automatic feeding mixer are normal. Don't park a basin of water and the wiper can't evaporate quickly. There should be no "squeak... squeak..." sound when the wiper is wiping. If there is, it means that the wiper blade is aging.
If you want to buy a mixer, you should pay special attention to the interior inspection. This is the end of the question. If you have any questions about this, please come to our website http://jackpetty.net Look!