攪拌一體車因其承載的攪拌車而易于凝結，如果不及時清洗，會損壞攪拌罐，影響攪拌車的使用壽命。因此，攪拌一體車的清潔非常重要。那么攪拌一體車手動擦洗方式是怎樣的呢？清洗方法又是怎樣的？
The integrated mixer truck is easy to condense because of the mixer truck it carries. If it is not cleaned in time, it will damage the mixing tank and affect the service life of the mixer truck. Therefore, the cleaning of the mixer is very important. So what is the manual scrubbing method for all-in-one mixer? What is the cleaning method?
攪拌一體車手動擦洗方式
Manual scrubbing mode of integrated mixer
將毛巾浸入水中，慢慢潤濕整個屋頂。
Dip the towel into the water and slowly wet the whole roof.
用濕毛巾在車頂擦拭測試以除去灰塵，并從上到下逐漸覆蓋車窗和灰塵。擦掉污垢不要用沙子擦毛巾。薄膜或玻璃的表面可能會被劃傷或劃傷。
Wipe the test with a wet towel on the roof to remove the dust, and gradually cover the windows and dust from top to bottom. Wipe off the dirt. Don't wipe the towel with sand. The surface of film or glass may be scratched or scratched.
如果很臟，請用軟毛刷擦拭，用水沖洗干凈，然后用毛巾擦拭。
If it is very dirty, please wipe it with a soft brush, rinse it with water, and then wipe it with a towel.
再次摩擦主體后，檢查是否有灰塵。在這種情況下，請立即再次擦拭，直到干凈為止。如上，用干凈的干毛巾再次擦拭機身，直沒有灰塵或水印。
After rubbing the body again, check for dust. In this case, wipe again immediately until the tip is clean. As above, wipe the body again with a clean dry towel until there is no dust or watermark.
Cleaning method of integrated mixer
1、每次充電前用水沖洗進料口，使進料口在充電時保持濕潤。
1. Before each charging, flush the feed port with water to keep the feed port moist during charging.
2、裝車時給隨車自帶的清洗水箱加水。
2. Add water to the cleaning water tank provided with the vehicle during loading.
3、裝料后沖洗進料口，清理進料口附近殘留的攪拌車。
3. Wash the feed inlet after loading, and clean up the residual mixer near the feed inlet.
4、在工地卸貨后，沖洗卸料槽，然后在攪拌車儲罐中加入30-40L的清洗水，使攪拌車儲罐在車輛返回時緩慢向前轉動。
4. After unloading at the construction site, flush the discharge tank, and then add 30-40l of cleaning water into the mixer tank to make the mixer tank rotate forward slowly when the vehicle returns.
5、下次裝車前切記將攪拌車儲罐內的污水排放干凈。
5. Before the next loading, remember to discharge the sewage in the tank of the mixer truck.
6、每天結束時徹底清洗攪拌車儲罐及進出料口周圍，確保沒有水泥和攪拌車結塊。
6. At the end of each day, thoroughly clean the mixer tank and the surrounding of the inlet and outlet to ensure that there is no cement and mixer caking.
7、如不慎忘記及時清洗，請及時用氣槍清洗，以免造成罐體清洗的損失。
7. If you accidentally forget to clean it in time, please clean it with an air gun in time to avoid the loss of tank cleaning.
此外如果混凝土凝固在攪拌車里面，會很大程度上影響到攪拌車的正常作業?；炷聊Y(jié)在攪拌罐里面的原因有很多，除了沒有及時清洗攪拌罐外，其中主要是攪拌車發動機不能運作，沒有動力輸入液壓機而招致液壓機中止工作，使得裝料罐不能轉動而讓混凝土凝結在攪拌車罐里面，所以要及時進行清理。更多相關內容您可以來關注我們網站
jackpetty.net資訊！
In addition, if the concrete solidifies in the mixer truck, it will greatly affect the normal operation of the mixer truck. There are many reasons for the concrete to coagulate in the mixing tank. In addition to not cleaning the mixing tank in time, the main reason is that the mixer truck engine can not operate, and the hydraulic machine is suspended due to the lack of power input, which makes the charging tank unable to rotate and makes the concrete coagulate in the mixing tank. Therefore, it is necessary to clean it in time. For more information, you can follow our website www.jfhntjbc Com information!
點擊撥打服務熱線：4008791999
