RM新时代官方-首页

您好,歡迎光臨萊州聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

自動上料攪拌車生產廠家

點擊撥打服務熱線:4008791999

一些攪拌車進水后的緊急處理方法

發布時間:2022-08-15 來源:http://jackpetty.net/ 瀏覽量:0

概述:下暴雨時會有積水嚴重的情況出現,很多自動上料攪拌車都遭受了車輛進水的無妄之災,小編在此向各攪拌車車主教授一些攪拌車進水后的緊急處理
下暴雨時會有積水嚴重的情況出現,很多自動上料攪拌車都遭受了車輛進水的無妄之災,小編在此向各攪拌車車主教授一些攪拌車進水后的緊急處理方法:
During the rainstorm, there will be serious water accumulation. Many automatic loading mixers have suffered from water intrusion. The small editor hereby teaches some emergency treatment methods to the owners of the mixers:
自動上料攪拌車底盤部件在涉水進程中容易造成潤滑油的變質,尤其是涉及到轉向、傳動等體系。如維修手冊要求在涉水后要對攪拌車底盤部件舉行潤滑脂加注。同時,應在路試進程中過細細聽底盤是否有非常聲音傳出,大概對底盤舉行拆裝查抄。
The chassis components of the automatic feeding mixer truck are easy to cause deterioration of the lubricating oil in the process of wading, especially involving the steering, transmission and other systems. If the maintenance manual requires that the chassis components of the mixer truck should be greased after wading. At the same time, during the road test, carefully listen to whether there is any abnormal sound coming from the chassis, and then disassemble and check the chassis.
攪拌車涉水中要是水進入車廂內,維修進程緊張是整理車內積水,位于攪拌車底盤下部有幾個密封膠堵,打開膠堵可以大概放出車廂內的積水。但由于車內裝飾質料地膠吸水性很強,應拆除地膠,安排于寬敞空間便于水分的蒸發,安置后還要過細打開空調,將車輛攪拌車循環開關調解到內循環,使車廂內水蒸氣議決空調體系排擠車外,在夏季這是一種非??旖莸囊I(lǐng)。
If water enters the compartment when the mixer truck is wading, the maintenance process is tense. There are several sealant plugs at the bottom of the mixer truck chassis, and the water in the compartment can be roughly discharged by opening the sealant plugs. However, as the floor glue of the interior decoration material has strong water absorption, the floor glue should be removed and arranged in a spacious space to facilitate the evaporation of water. After the placement, the air conditioner should be turned on too carefully, and the circulation switch of the vehicle mixer should be adjusted to the internal circulation, so that the water vapor in the vehicle can be excluded from the air conditioning system. This is a very fast dehumidification method in summer.
顛末果斷,要是水進入攪拌車發動機內部,應當拆下火花塞,人為堵截燃油提供體系和點火體系后用馬達運轉發動機,使進入自動上料攪拌車發動機內部的水順利排擠。同時查抄車輛各體系油液狀態,出現起沫、渾濁等征象應及時舉行變更。
After decisive decision, if water enters the engine of the mixer truck, the spark plug shall be removed, and the engine shall be operated by the motor after the fuel supply system and ignition system are manually blocked, so that the water entering the engine of the automatic feeding mixer truck can be smoothly displaced. At the same time, check the oil state of each system of the vehicle. In case of signs such as foaming and turbidity, change it in time.
自動上料攪拌車
檢測完畢后應用壓縮氛圍打掃自動上料攪拌車發動機艙內部電器連接部件,警備水分積蓄在電器連接部位造成的腐化。打掃部位是:保險盒、傳感器插頭、車身積水存積處。整理完畢后,舉行車輛路試,以確定發動機在行駛進程中無非常噪音。若有明顯行駛噪音,查抄發動機軸承和旋轉部件。
After the detection, clean the internal electrical connection parts of the engine compartment of the automatic feeding mixer with compressed air to guard against the corrosion caused by water accumulated in the electrical connection parts. The key parts to be cleaned are: fuse box, sensor plug and body water accumulation. After finishing, the vehicle road test shall be conducted to ensure that the engine has no abnormal noise during driving. If there is obvious driving noise, check the engine bearings and rotating parts.
自動上料攪拌車涉水進程中要是出現進水熄火環境,立刻關閉點火開關,不要試圖再次啟動攪拌車發動機,將車輛移寧?kù)o地點,只管即便使車輛前高后低,如允許使進入排氣管中的水流出,克制破壞自動上料攪拌車的有關部件。
In case of water inflow and flameout during the wading process of the automatic feeding mixer truck, immediately turn off the ignition switch, do not try to start the engine of the mixer truck again, and move the vehicle to a quiet place. Even if the vehicle is high in front and low in rear, if the water entering the exhaust pipe is allowed to flow out, the relevant parts of the automatic feeding mixer truck will not be damaged.
一些攪拌車進水后的緊急處理方法就講解到這里了,您對此有什么問題要咨詢了解,就來我們網站http://jackpetty.net這兒看看吧。
This is the end of some emergency treatment methods after the mixer truck is flooded. If you have any questions, please come to our website http://jackpetty.net Take a look here.

截屏,微信識別二維碼

RM新时代官方-首页