RM新时代官方-首页

　　Concrete mixer is widely used, in the use of concrete mixer, wear is inevitable, wear and tear will affect the production efficiency of the equipment, so the most important point in the production process is to minimize the wear of concrete mixer.

　　如何減少混凝土攪拌車的磨損提高生產效率？

　　How to reduce the abrasion of concrete mixer truck and improve the production efficiency?
            

　　是混凝土攪拌車的潤滑，需要潤滑的地方有很多，加潤滑劑的方法和量都不一樣，有時候還需要更換新的潤滑劑，而且還需要定時定量的假潤滑劑，用戶一定了解這些潤滑技術，保證混凝土攪拌車的潤滑。

　　The first is the lubrication of the concrete mixer. There are many places to be lubricated. The method and quantity of lubricant are different. Sometimes new lubricants need to be replaced, and fixed time and quantitative false lubricants are needed. Users must understand these lubrication technologies to ensure the lubrication of concrete mixer.

　　混凝土攪拌車比較容易磨損的部位有振動篩、攪拌葉片、表面、攪拌筒，怎樣減少這些地方的磨損？振動篩磨損關鍵在與振動軸承，用戶一定要選擇高質量的軸承，潤滑裝置要合理，用戶一定要經常對軸承進行潤滑；由于攪拌葉片需要攪拌混凝土，所以一般磨損比較嚴重，這就需要用戶在加物料時注意盡量避免大塊硬物體或者鋼絲等物體方法攪拌筒內，并經常對攪拌葉片進行檢修；混凝土攪拌車表面被磨損的可能原因有微震、滑動、沖擊、擦傷、生銹等，這就需要用戶在使用時注意，避免碰撞，并保持表面的干凈，發現生銹時要及時處理；攪拌筒也經常磨損，這就需要用戶當工作結束后馬上清理攪拌筒，防止混凝土在攪拌筒內凝固。

　　There are vibrating screen, mixing blade, surface and mixing drum where the concrete mixer is easy to wear. How to reduce the wear of these places? The key to the abrasion of vibrating screen lies in the vibration bearing. The user must select high-quality bearing, the lubricating device should be reasonable, and the user must often lubricate the bearing; because the mixing blade needs to mix concrete, it is generally worn seriously, which requires the user to pay attention to avoid large hard objects or steel wire and other objects when adding materials, and frequently adjust the mixing cylinder Maintenance of mixing blades; possible causes of concrete mixer surface abrasion include micro vibration, sliding, impact, abrasion, rust, etc., which requires users to pay attention to avoid collision, keep the surface clean, and timely deal with rust when finding rust; the mixing cylinder is also often worn, which requires users to clean the mixing cylinder immediately after the work is finished to prevent the concrete from mixing Solidify in mixing drum.