RM新时代官方-首页

　　攪拌一體車的使用已經被廣泛化了，主要應用于各地施工現場，所以如果想更好的使用它，就要對有關問題進行一個了解，這樣才能避免不好的情況出現，那么今天來分析一個問題--攪拌一體車運轉時會什么會出現高溫現象？

　　The use of mixing vehicle has been widely, mainly used in the construction site, so if you want to better use it, it is necessary to carry out an understanding of the relevant problems, so as to avoid the bad situation, so today to analyze a problem -- what will appear high temperature phenomenon when mixing vehicle operation?

　　從生產實踐來看，如果發現操作面板上的電流表指示的電流間歇性上升，常見的原因是：設備各部分運行正常時，需要查找泥勺頭，這時泥勺頭很可能出現松動，勺頭松動是造成電流周期性、間歇性上升的主要原因。當然，您還應該檢查勺子底部是否有東西阻止勺子旋轉。如果電流繼續上升，沒有回到額定電流，則可能是負載過大或電壓過低造成的。

　　From the production practice, if the current indicated by the ammeter on the operation panel is found to rise intermittently, the common reason is: when each part of the equipment runs normally, the mud spoon head needs to be searched, and then the mud spoon head is likely to loosen, which is the main reason for the periodic and intermittent rise of the current. Of course, you should also check the bottom of the spoon for anything that prevents the spoon from spinning. If the current continues to rise and does not return to the rated current, it may be caused by too much load or too low voltage.

　　是喂料量大造成的，需要調整喂料量。是機械問題導致負載過大，應該停止。但是，如果是低電壓造成的，則純粹是外接電源造成的。積極的方法是觀察電流是否有大的變化和電機溫升。如果這種現象突然發生，往往是由于粒徑增大所致。礦石硬度的變化可能是由不同的采礦表面和成分引起的。在這兩種情況下，攪拌過程都會引起相應的變化。

　　It is caused by large feeding volume, which needs to be adjusted. Mechanical problem causing excessive load and should be stopped. However, if it is caused by low voltage, it is purely caused by external power supply. A positive approach is to observe whether there is a large change in current and motor temperature rise. If this phenomenon occurs suddenly, it is usually caused by an increase in particle size. Variations in mineral hardness may be caused by different mining surfaces and compositions. In both cases, the stirring process causes a corresponding change.

　　另外，攪拌一體車生產廠家展開的檢測運動對車主長短常有益處，車主可以應用這些檢測運動對喜歡車進行具體體檢，實時發現并掃除一些潛在的毛病，然后省去了未來能夠呈現的高額維修保護費用。攪拌一體車在保養時也要會保養才可以，錯誤的保養方法不僅會使設備的質量有所下降，嚴重的可能會損壞某些零件，這在很大程度上降低了它的使用壽命。

　　In addition, the free detection movement of the mixing vehicle manufacturer is very beneficial to the owner. The owner can use the detection movement to carry out specific physical examination of the car, find and sweep away some potential problems in real time, and then save the high maintenance and protection costs that can be presented in the future. Mixing vehicle in the maintenance of maintenance can also be maintained, the wrong maintenance method will not only make the quality of the equipment decreased, serious may damage some parts, which to a large extent reduces its service life.

　　攪拌一體車運轉時會什么會出現高溫現象？以上內容中已經說明了，希望大家可以好好了解到。大家在日后的保養時一定要注意，千萬不要犯錯誤。更多內容的了解，大家可以來我們網站jackpetty.net咨詢。

　　What will appear high temperature phenomenon when the mixing vehicle runs? The above content has been explained, I hope you can have a good understanding. We must pay attention to the maintenance in the future, do not make mistakes. For more information, you can come to our website jackpetty.net.