RM新时代官方-首页

　　自動上料攪拌車的使用時間越長，出現的問題就會越多，目前很多用戶反映攪拌車出現粘罐的問題，那么今天我們就來分析下原因。

　　The longer the automatic feeding mixer is used, the more problems will occur. At present, many users report that the mixer has the problem of sticking the tank, so today we will analyze the reasons.

　　自動上料攪拌車的攪拌槽葉片設計不合理，導致出料殘渣率高，攪拌槽內殘料過多；混凝土運輸距離過長，運輸時間過長。罐內混凝土的“初凝”不僅影響混凝土質量，還會對攪拌車的液壓設備造成損壞；施工現場施工不合理。

　　The unreasonable design of the stirring tank blade of the automatic feeding agitator leads to high discharge residue rate and too much residual material in the stirring tank. The transportation distance and time of concrete are too long. The "initial setting" of concrete in the tank not only affects the quality of concrete, but also damages the hydraulic equipment of mixer truck. Construction site construction is not reasonable.

　　混凝土運到工地后，卸車時間過長，容易造成罐內混凝土凝結；卸料后清洗不徹底，導致葉片和攪拌罐內部混凝土殘留，干燥后堆積越來越多；攪拌車工作環境溫度過高，特別是夏季白天氣溫在30℃以上，長期暴露在攪拌罐內溫度會更高，所以混凝土會在罐內凝結。

　　After concrete is delivered to the site, unloading time is too long, easy to cause concrete condensation in the tank; After unloading, the cleaning is not thorough, leading to the concrete residue in the blade and mixing tank, and the accumulation is more and more after drying; Mixing truck working environment temperature is too high, especially in summer daytime temperature above 30℃, long-term exposure to the mixing tank temperature will be higher, so the concrete will be condensed in the tank.

　　所以查明了原因，我們就應該立即去處理。每次完成出站任務后回站，檢查自動上料攪拌車儲水箱的水量，使自動上料攪拌車水箱內的水隨時充滿，以防萬一的緊急情況。

　　So once we find out what's going on, we should deal with it immediately. Check the water quantity of the storage tank of the automatic feeding mixer truck after completing the outbound task each time, so that the water in the tank of the automatic feeding mixer truck can be filled at any time in case of emergency.

　　另外，減水劑是一種混凝土外加劑，可以在保持混凝土坍落度的同時減少拌和水量。但是，在添加減水劑的時候，一定要記得有商品混凝土站實驗室的人在場，否則混凝土的質量和強度不夠，后果由司機承擔。

　　In addition, water reducer is a concrete admixture that can reduce the amount of water mixing while maintaining the slump of concrete. However, when adding water reducing agent, we must remember the presence of the commercial concrete station laboratory, otherwise the quality and strength of concrete is not enough, the consequences are borne by the driver.

　　如果遇到人為因素或不可抗力因素，導致長期無法卸料的情況，應隨時檢查自動上料攪拌車罐內混凝土狀況，一旦發現混凝土開始凝固。向負責人報告后立即卸貨，以防整罐報廢。

　　If there are human factors or force majeure factors that lead to long-term unloading, the concrete condition in the tank of the automatic feeding mixer should be checked at any time, once the concrete begins to solidify. Unload immediately after reporting to the person in charge to prevent the whole tank from being scrapped.

　　自動上料攪拌車怎么會出現粘罐問題呢？總之，我們在上面已經講解了原因以及怎么預防處理內容了，大家還有不懂得地方可以隨時來咨詢我們，點擊網站jackpetty.net即可聯系我們的！

　　How can the problem of sticking tank appear in the automatic feeding mixer? In short, we have explained the reasons and how to prevent the content of the above treatment, we still do not know where to consult us at any time, click on the website jackpetty.net can contact us!