RM新时代官方-首页

　　Transportation of concrete, generally will not choose ordinary truck, but use automatic mixer truck, mixing concrete while running this kind of vehicle. In this way, not only can the concrete be mixed in time to prevent the concrete from drying, but also it can be more safely run to the destination. How to operate its discharge rod? This knowledge will be introduced in the following:

　　1、自動攪拌車啟動前，應將攪拌操縱桿放在“空檔”位置；

　　1. Before starting the automatic mixer, the mixing control lever should be placed in the "neutral" position;

　　2、啟動后，應將攪拌操縱桿放在“卸料”位置，放去筒內積水；

　　2. After start-up, the mixing control rod should be placed in the "unloading" position to drain the water in the cylinder;

　　3、裝料時，攪拌操作桿應放在“裝料”位置；

　　3. When loading, the mixing operating rod should be placed in the "loading" position;
            

　　4、運輸前，自動攪拌車卸料槽必須固定在“行駛”位置，防止擺動；

　　4. Before transportation, the discharge tank of the automatic mixer must be fixed at the "running" position to prevent swing;

　　5、操作操縱桿時，應在“空檔”位置稍作停留后方可動下一個位置。

　　5. When operating the control lever, it should be in the "neutral" position for a while before moving to the next position.

　　大家在操作放料桿的時候，請嚴格按照步驟進行。自動攪拌車的放料桿，只有用戶正確進行操作，才能讓車的效率更高，大家在操作過程中一定要找準位置。

　　Please strictly follow the steps when operating the discharging rod. The discharging rod of the automatic mixer can make the truck more efficient only if the user operates it correctly. We must find the correct position in the operation process.

　　以上是關于自動攪拌車放料桿如何操作的步驟，希望對大家有所幫助，如想要了解更多內容歡迎點擊我們的http://jackpetty.net網站。

　　The above is about how to operate the discharging rod of the automatic mixer. I hope it will help you. If you want to know more, please click our http://jackpetty.net Website.