攪拌車攪拌桶的維護工作有哪些？
概述： 因為混凝土會在短時間內凝結成硬塊，且對鋼材和油漆有必定的腐蝕性，所以每次使用混凝土貯罐后，洗凈粘附在混凝土貯罐及進出料口上的混
因為混凝土會在短時間內凝結成硬塊，且對鋼材和油漆有必定的腐蝕性，所以每次使用混凝土貯罐后，洗凈粘附在混凝土貯罐及進出料口上的混凝土是每日保護必須仔細進行的作業。下面小編就給大家來說說水泥攪拌一體車、攪拌罐的維護作業都有哪些。
Because the concrete will condense into a hard block in a short time, and has certain corrosivity to steel and paint, so cleaning the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete tank is a daily protection must be carried out carefully. The following small make up for you to talk about the cement mixer truck, mixing tank maintenance operations have what.
1、每次裝料前用水沖洗進料口，使進料口在裝料時保持濕潤；
1. Flush the feed port with water before each loading to keep the feeding port moist during loading;
2、在裝料的同時向隨車自帶的清洗用水水箱中注滿水；
2. At the same time of loading, fill the water tank with water;
3、裝料后沖洗進料口，洗凈進料口附近殘留的混凝土；
3. After loading, wash the inlet to clean the residual concrete near the inlet;
4、到工地卸料后，沖洗出料槽，然后向混凝土貯罐內加清洗用水35—45L；在車輛回程時保持混凝土攪拌罐車混凝土貯罐正向慢速轉動；
4. After unloading at the construction site, wash the discharge tank, and then add 35-45l of cleaning water into the concrete storage tank; keep the concrete mixing tank of the concrete mixing tank truck rotate slowly in the forward direction when the vehicle returns;
5、下次裝料前切記放掉混凝土貯罐內的污水；
5. Remember to discharge the sewage in the concrete tank before the next loading;
6、每天收工時徹底清洗混凝土貯罐及進出料口周圍，保證不粘有水泥及混凝土結塊。
6. At the end of each day, the concrete storage tank and the area around the material inlet and outlet shall be thoroughly cleaned to ensure that there is no cement and concrete caking.
點擊撥打服務熱線：4008791999
